There is an increasing demand for fish and fish protein, which has resulted in widespread overfishing in wild fisheries. Fish farming offers fish marketers another source. However, farming carnivorous fish, such as salmon, does not always reduce pressure on wild fisheries, since carnivorous farmed fish are usually fed fishmeal and fish oil extracted from wild forage fish. In this way, the salmon can consume in weight more wild fish than they weigh themselves. The global returns for fish farming recorded by the FAO in 2008 totalled 33.8 million tonnes worth about $US 60 billion.
Major categories of fish aquaculture
There are two kinds of aquaculture: extensive aquaculture based on local photosynthetical production and intensive aquaculture, in which the fish are fed with external food supply.
Extensive aquaculture
Limiting for growth here is the available food supply by natural sources, commonly zooplankton feeding on pelagic algae or benthic animals, such as crustaceans and mollusks. Tilapia species filter feed directly on phytoplankton, which makes higher production possible. The photosynthetic production can be increased by fertilizing the pond water with artificial fertilizer mixtures, such as potash, phosphorus, nitrogen and micro-elements. Because most fish are carnivorous, they occupy a higher place in the trophic chain and therefore only a tiny fraction of primary photosynthetic production (typically 1%) will be converted into harvest-able fish.
Another option is to use a wetland system such as that of Veta La Palma.
In order to tap all available food sources in the pond, the aquaculturist will choose fish species which occupy different places in the pond ecosystem, e.g., a filter algae feeder such as tilapia, a benthic feeder such as carp or catfish and a zooplankton feeder (various carps) or submerged weeds feeder such as grass carp.
Despite these limitations significant fish farming industries use these methods. In the Czech Republic thousands of natural and semi-natural ponds are harvested each year for trout and carp. The large ponds around Trebon were built from around 1650 and are still in use.
Intensive aquaculture
The cost of inputs per unit of fish weight is higher than in extensive farming, especially because of the high cost of fish feed, which must contain a much higher level of protein (up to 60%) than cattle food and a balanced amino acid composition as well. However, these higher protein level requirements are a consequence of the higher food conversion efficiency (FCR—kg of feed per kg of animal produced) of aquatic animals. Fish like salmon have FCR's in the range of 1.1 kg of feed per kg of salmon whereas chickens are in the 2.5 kg of feed per kg of chicken range. Fish don't have to stand up or keep warm and this eliminates a lot of carbohydrates and fats in the diet, required to provide this energy. This frequently is offset by the lower land costs and the higher productions which can be obtained due to the high level of input control.
Essential here is aeration of the water, as fish need a sufficient oxygen level for growth. This is achieved by bubbling, cascade flow or aqueous oxygen. Catfish, Clarias spp. can breathe atmospheric air and can tolerate much higher levels of pollutants than trout or salmon, which makes aeration and water purification less necessary and makes Clarias species especially suited for intensive fish production. In some Clarias farms about 10% of the water volume can consist of fish biomass.
The risk of infections by parasites like fish lice, fungi (Saprolegnia spp.), intestinal worms (such as nematodes or trematodes), bacteria (e.g., Yersinia spp., Pseudomonas spp.), and protozoa (such as Dinoflagellates) is similar to animal husbandry, especially at high population densities. However, animal husbandry is a larger and more technologically mature area of human agriculture and better solutions to pathogen problem exist. Intensive aquaculture does have to provide adequate water quality (oxygen, ammonia, nitrite, etc.) levels to minimize stress, which makes the pathogen problem more difficult. This means, intensive aquaculture requires tight monitoring and a high level of expertise of the fish farmer.
Very high intensity recycle aquaculture systems (RAS), where there is control over all the production parameters, are being used for high value species. By recycling the water, very little water is used per unit of production. However, the process does have high capital and operating costs. The higher cost structures mean that RAS is only economical for high value products like broodstock for egg production, fingerlings for net pen aquaculture operations, sturgeon production, research animals and some special niche markets like live fish.
Raising ornamental cold water fish (goldfish or koi), although theoretically much more profitable due to the higher income per weight of fish produced, has never been successfully carried out until very recently. The increased incidences of dangerous viral diseases of koi Carp, together with the high value of the fish has led to initiatives in closed system koi breeding and growing in a number of countries. Today there are a few commercially successful intensive koi growing facilities in the UK, Germany and Israel.
Some producers have adapted their intensive systems in an effort to provide consumers with fish that do not carry dormant forms of viruses and diseases.
Specific types of fish farms
Within intensive and extensive aquaculture methods, there are numerous specific types of fish farms; each has benefits and applications unique to its design.
Cage system
Recently, copper alloys have become important netting materials in aquaculture. Copper alloys are antimicrobial, that is, they destroy bacteria, viruses, fungi, algae, and other microbes. In the marine environment, the antimicrobial/algaecidal properties of copper alloys prevent biofouling, which can briefly be described as the undesirable accumulation, adhesion, and growth of microorganisms, plants, algae, tubeworms, barnacles, mollusks, and other organisms.
The resistance of organism growth on copper alloy nets also provides a cleaner and healthier environment for farmed fish to grow and thrive.
In addition to its antifouling benefits, copper netting has strong structural and corrosion-resistant properties in marine environments.
Copper-zinc brass alloys are currently (2011) being deployed in commercial-scale aquaculture operations in Asia, South America and the USA (Hawaii). Extensive research, including demonstrations and trials, are currently being implemented on two other copper alloys: copper-nickel and copper-silicon. Each of these alloy types has an inherent ability to reduce biofouling, cage waste, disease, and the need for antibiotics while simultaneously maintaining water circulation and oxygen requirements. Other types of copper alloys are also being considered for research and development in aquaculture operations.
Irrigation ditch or pond systems
These use irrigation ditches or farm ponds to raise fish. The basic requirement is to have a ditch or pond that retains water, possibly with an above-ground irrigation system (many irrigation systems use buried pipes with headers.) Using this method, one can store one's water allotment in ponds or ditches, usually lined with bentonite clay. In small systems the fish are often fed commercial fish food, and their waste products can help fertilize the fields. In larger ponds, the pond grows water plants and algae as fish food. Some of the most successful ponds grow introduced strains of plants, as well as introduced strains of fish.
Control of water quality is crucial. Fertilizing, clarifying and pH control of the water can increase yields substantially, as long as eutrophication is prevented and oxygen levels stay high.Yields can be low if the fish grow ill from electrolyte stress.
Composite fish culture
The Composite fish culture system is a technology developed in India by the Indian Council of Agricultural Research in the 1970s. In this system both local and imported fish species, a combination of five or six fish species is used in a single fish pond. These species are selected so that they do not compete for food among them having different types of food habitats. As a result the food available in all the parts of the pond is used. Fish used in this system include catla and silver carp which are surface feeders, rohu a column feeder and mrigal and common carp which are bottom feeders. Other fish will also feed on the excreta of the common carp and this helps contribute to the efficiency of the system which in optimal conditions will produce 3000–6000 kg of fish per hectare per year.
Integrated recycling systems
One of the largest problems with freshwater aquaculture is that it can use a million gallons of water per acre (about 1 m³ of water per m²) each year. Extended water purification systems allow for the reuse (recycling) of local water.
The largest-scale pure fish farms use a system derived (admittedly much refined) from the New Alchemy Institute in the 1970s. Basically, large plastic fish tanks are placed in a greenhouse. A hydroponic bed is placed near, above or between them. When tilapia are raised in the tanks, they are able to eat algae, which naturally grows in the tanks when the tanks are properly fertilized.
The tank water is slowly circulated to the hydroponic beds where the tilapia waste feeds commercial plant crops. Carefully cultured microorganisms in the hydroponic bed convert ammonia to nitrates, and the plants are fertilized by the nitrates and phosphates. Other wastes are strained out by the hydroponic media, which doubles as an aerated pebble-bed filter.
This system, properly tuned, produces more edible protein per unit area than any other. A wide variety of plants can grow well in the hydroponic beds. Most growers concentrate on herbs (e.g. parsley and basil), which command premium prices in small quantities all year long. The most common customers are restaurant wholesalers.
Since the system lives in a greenhouse, it adapts to almost all temperate climates, and may also adapt to tropical climates. The main environmental impact is discharge of water that must be salted to maintain the fishes' electrolyte balance. Current growers use a variety of proprietary tricks to keep fish healthy, reducing their expenses for salt and waste water discharge permits. Some veterinary authorities speculate that ultraviolet ozone disinfectant systems (widely used for ornamental fish) may play a prominent part in keeping the Tilapia healthy with recirculated water.
A number of large, well-capitalized ventures in this area have failed. Managing both the biology and markets is complicated.
Classic fry farming
This is also called a "Flow through system" Trout and other sport fish are often raised from eggs to fry or fingerlings and then trucked to streams and released. Normally, the fry are raised in long, shallow concrete tanks, fed with fresh stream water. The fry receive commercial fish food in pellets. While not as efficient as the New Alchemists' method, it is also far simpler, and has been used for many years to stock streams with sport fish. European eel (Anguilla anguilla) aquaculturalists procure a limited supply of glass eels, juvenile stages of the European eel which swim north from the Sargasso Sea breeding grounds, for their farms. The European eel is threatened with extinction because of the excessive catch of glass eels by Spanish fishermen and overfishing of adult eels in, e.g., the Dutch IJsselmeer, Netherlands. As per 2005, no one has managed to breed the European eel in captivity.
Indoor fish farming
Other treatments such as UV sterilization, ozonation, and oxygen injection are also used to maintain optimal water quality. Through this system, many of the environmental drawbacks of aquaculture are minimized including escaped fish, water usage, and the introduction of pollutants. The practices also increased feed-use efficiency growth by providing optimum water quality (Timmons et al., 2002; Piedrahita, 2003).
One of the drawbacks to recirculation aquaculture systems is water exchange. However, the rate of water exchange can be reduced through aquaponics, such as the incorporation of hydroponically grown plants (Corpron and Armstrong, 1983) and denitrification (Klas et al., 2006). Both methods reduce the amount of nitrate in the water, and can potentially eliminate the need for water exchanges, closing the aquaculture system from the environment. The amount of interaction between the aquaculture system and the environment can be measured through the cumulative feed burden (CFB kg/M3), which measures the amount of feed that goes into the RAS relative to the amount of water and waste discharged.
Because of its high capital and operating costs, RAS has generally been restricted to practices such as broodstock maturation, larval rearing, fingerling production, research animal production, SPF (specific pathogen free) animal production, and caviar and ornamental fish production. Although the use of RAS for other species is considered by many aquaculturalists to be impractical, there has been some limited successful implementation of this with high value product such as barramundi, sturgeon and live tilapia in the US.
Slaughter methods
Tanks saturated with carbon dioxide have been used to make fish unconscious. Then their gills are cut with a knife so that the fish bleed out before they are further processed. This is no longer considered a humane method of slaughter. Methods that induce much less physiological stress are electrical or percussive stunning and this has led to the phasing out of the carbon dioxide slaughter method in Europe.
Inhumane methods
According to T. Håstein of the National Veterinary Institute, "Different methods for slaughter of fish are in place and it is no doubt that many of them may be considered as appalling from an animal welfare point of view." A 2004 report by the EFSA Scientific Panel on Animal Health and Welfare explained: "Many existing commercial killing methods expose fish to substantial suffering over a prolonged period of time. For some species, existing methods, whilst capable of killing fish humanely, are not doing so because operators don’t have the knowledge to evaluate them." Following are some of the less humane ways of killing fish.
Air Asphyxiation. This amounts to suffocation in the open air and is extremely painful. The process can take upwards of 15 minutes to induce death, although unconsciousness typically sets in sooner.
Ice baths / chilling. Farmed fish are sometimes chilled on ice or submerged in near-freezing water. The purpose is to dampen muscle movements by the fish and to delay the onset of post-death decay. However, it does not necessarily reduce sensibility to pain; indeed, the chilling process has been shown to elevate cortisol. In addition, reduced body temperature extends the time before fish lose consciousness.
CO2 narcosis.
Exsanguination without stunning. This is an extremely painful process in which fish are taken up from water, held still, and cut so as to cause bleeding. According to references in Yue , this can leave fish writhing for an average of four minutes, and some catfish still responded to noxious stimuli after more than 15 minutes.
More humane methods
Percussive stunning.
Electric stunning. This can be humane when a proper current, duration, conductivity, and temperature are present. One advantage is that in-water stunning allows fish to be rendered unconscious without stressful handling or displacement. However, improper stunning may not induce insensibility long enough to prevent the fish from enduring exsanguination while conscious. It's unknown whether the optimal stunning parameters that researchers have determined in studies are used by the industry in practice.
Tidak ada komentar:
Posting Komentar